Products

DESCRIPTION

Basic Info.

Model NO.	T Series
Type	Cylindrical Gear Box
Speed Ratio Range	1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1
Product Type	Gear Box
Torque Range	11.2 — 5713 Nm
Efficiency	Average Efficiency Reaches 98%
Maintenance Cycle	Replace Lubricant Every 1000-2000 Hours
Transport Package	Woodencase
Trademark	SAIWEI
Origin	Shanghai
HS Code	4202129000
Production Capacity	5000PCS/Month

Product Description

Product Features	Description
Product Models	T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25
Maintenance	Clean internally and replace lubricant after initial use of two weeks or 100-200 hours. For long-term use, replace lubricant every half to one year or every 1000-2000 hours
Lubricant	China Petroleum's all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees
Product Description	The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries
Technical Features	The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities
Performance Features	The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run forward and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force
Technical Parameters	Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 - 5713 Nm. Power range: 0.014 - 335 kW

·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of two weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to one year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum's all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run forward and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.

RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity. Q:What if I don't know which gear reducer I need?
A:Don't worry, Send as much information as you can, our team will help you find the right one you are looking for. Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible. Q:What is the MOQ?
A: It is OK for one or small pieces trial order for quality testing. Q:How long should I wait for the feedback after I send the inquiry?
A: Within 6 hours Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc